Join Date: Jul 2012
Nominated 0 Times in 1 Post
TOTW/F/M Award(s): 0
Thanked 39 Times in 31 Posts
Re: Megane 1 abs early activation fixed
Just a follow up on this fix,
I had no ABS light coming on when the abs activated, but it was lighting up at ignition on, then going out after a few seconds.
Each sensor was disconnected at the wheel arch.
All sensors were checked with a multimeter and measured for resistance, each showed 1.8 kohms and with each wheel spun by hand (wheel off)the resistance would fluctuate up and down.
The offside front sensor was showing less fluctuation, after closer examination i could see the sensor wasn't seated properly.
If you need to you can check the ABS unit for continuity to all 4 sensors (ABS unit under front offside wing) simply unplug the multi connector.
Currently in wasntme's garage:
54 plate scenic 1.5 dci 100