Renault Forums :: Independent Renault forum - View Single Post - boring but necessary question

View Single Post
post #1 of (permalink) Old 10th October 2012 Thread Starter
Join Date: Oct 2012
Posts: 42
Nominated 0 Times in 0 Posts
TOTW/F/M Award(s): 0
Thanks: 1
Thanked 1 Time in 1 Post
boring but necessary question

Hi folks,

I was hoping one of you nice people with access to the appropriate documentation might be able to look up the torque values for a job I intend to do at the weekend? You'd be helping me out if you could.

I am going to try and replace the rear discs and a lower ball joint on my scenic mk1 2003 1.9dci (phase 2)

Is someone can tell me the torque wrench settings for the following nuts/bolts i'd appreciate it.

1. rear hub nut
2. brake pad carrier to hub
3. caliper to carrier
4. ball joint taper nut
5. ball joint to lower arm bolts

Also one last Q.
Is it necessary to change the hub nut or do some change them and some dont?

Many thanks,

Currently in Jime17's garage:
Scenic 2002 1.9 dci, mini mayfair 998
Jime17 is offline  
  5 Lastest Threads by Jime17
Thread Forum Last Poster Replies Views Last Post
Scenic mk1 ph2 1.9 dci fuel filter change Engines Jime17 7 444 6th December 2015 06:00 PM
2003 scenic 1.9 dci Experienced with timing belt... Engines madnoel10 1 878 20th July 2013 06:54 AM
Experience required please - Scenic mk1 ph2 1.9... Engines Jime17 0 889 19th July 2013 10:28 PM
Big hammer or bigger hammer? Brakes/Hubs Ralph 11 2040 13th March 2013 12:03 PM
this must be a common issue! Electronics VelSatisfied 3 896 21st January 2013 10:41 PM
For the best viewing experience please update your browser to Google Chrome