Renault Forums :: Independent Renault forum - View Single Post - Espace III Windows

View Single Post
post #3 of (permalink) Old 16th October 2012 Thread Starter
Junior Member
Join Date: Oct 2012
Posts: 2
Nominated 0 Times in 0 Posts
TOTW/F/M Award(s): 0
Thanks: 1
Thanked 0 Times in 0 Posts
Re: Espace III Windows rear passenger glass fitting?

Here is the answer should anyone else have to replace a shattered rear passenger window.

1. Remove the internal door trim, disconnect the regulator from the window. Remove the regulator, ( you have to undo the door handle to get to the top bolt.)

2 Remove the external door trim. Extract the the window seal from the door frame.

3. Take the new glass fitted with the regulator bracket and lower into the door from the outside. Slot the front edge of the glass into the door upright. You should then have enough room to get the back edge of the window into the frame. You need to keep the glass as high as possible.

4. Once slotted into the door, lower the glass down to the lowest position and refit the window seal. I used PTFE lube. You can slide it into the frame around the window glass, Start with the front edge, half the top then the back edge, finally shove the top into the frame. Slide the glass up into the runners. Get a mate to hold the glass up to the top when you refit the regulator. Secure all the bolts. Refit the outer trim on the top of the door.

5 Refit the door panel having previously vacuumed out all the glass fragments.
Currently in TGCLGC's garage:
TGCLGC is offline  
For the best viewing experience please update your browser to Google Chrome