Join Date: Dec 2007
Nominated 0 Times in 0 Posts
TOTW/F/M Award(s): 0
Thanked 3 Times in 3 Posts
Re: Megane 1 brake caliper out of line with disk
It's neither of those as the caliper is squint when I try to push it back onto the disk with the new pads in.
That's with the whole caliper off the caliper bracket.
With new pads in I can push one end onto the disk but the other end is so squint that the caliper body hits the disk.
The part of the caliper that the outer pad fits into is out of line with the rest of the caliper.
One of the two long 13mm bolts with rubber boots is sticking out half an inch, and the other about one inch.
If I try slackening both of those bolts it makes no difference.
I'm going to buy an allen key socket and try slackening the large allen bolts.
If I get the caliper on with new pads is there a way of then lining it all up so that it is spot on?
Currently in waigy's garage:
2000 X reg megane mk1 1.4 16V