Join Date: Mar 2013
Nominated 0 Times in 0 Posts
TOTW/F/M Award(s): 0
Thanked 1 Time in 1 Post
Re: Renault Laguna 2 - Heater Blower *FIXED*
+1 for this advice.
I did a similar job on mine this weekend. Removing the motor was tricky but the instructions in the Haynes manual made sense in the end.
I didn't have the tools to fully strip the motor so I sprayed some WD40 on each bush. I then used a pair of needle nosed pliers on the braided wire to gently pull each bush backwards and forwards a dozen times or so.
The bush guide on one side was corroded so I guess that bush was seized in there (that one felt stiff to start with) but the WD40 and exercise did the trick. It hasn't missed a beat in the 50 miles since.
Next job is to clear the scuttle drains (or whatever you guys call them) and stop the corrosion problem at source.
Currently in Bandit127's garage:
2001 Laguna II 1.8 Hatch. 1991 XT600.