Join Date: Oct 2006
Nominated 0 Times in 0 Posts
TOTW/F/M Award(s): 0
Thanked 0 Times in 0 Posts
hi yusuf gaz
did you have 12v and earth on the plug to the left of the display(see pic) if so try running a cable direct from there to the motors if they work check you have 8v 8v 12 on the 3 pin plug on the from the control to the resistor pack (see pic)
I`m going to run a cable direct 12 v supply to the motors to see if there is any life in them. Which 3 pin plug are you talking about as I havent managed to take the controller off, is it behind the controller? havent figured out how to take it off but all the lights on the controller are working and when pressed the relevent flaps operate. The resistor pack is the two plugs with the yellow color that has two wires each going in right? Then from there goes to the two motors right?
Currently in yusuf_gaz's garage:
1997 Renault Espace 2.2 TD
Last edited by yusuf_gaz; 24th October 2006 at 05:40 PM.