Independent Renault Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-18 of 112 Results
  1. Brakes/Hubs
    Hi, Just about to replace the rear discs on a 2009 2.0 Turbo Laguna III Coupe (petrol) Have already read about and had one panic attack, with reference to electronic parking brake restrictions when compressing calipers. But have just had the wheel off, and the motor is on the rear cross member...
  2. Brakes/Hubs
    hi can anyone tell me what the rear hub nut torque is on a laguna 2. 2 litre dci 150bhp hatchback is please . have asked around other places and have been told anywhere 100lbs ft to 280lbs ft .
  3. Brakes/Hubs
    Hey all, Can anyone tell me the toque specs for the following: 1) Caliper Slider Bolts 2) Caliper Bracket Bolts 3) Central Hub Nut I also have a few general questions: 1) Should the bleeder valve be open before pushing the caliper piston back? 2) Are the Brake Rotors held on by the Hub Nut...
  4. Transmissions
    Hi guys, does anyone know what the torque setting should be for the scenic 2 litre vvt front hum nuts? Just done a CV joint replacement and can not find the info. Thankyou!
  5. Brakes/Hubs
    hi all trying to find a front drivers side hub for my 1999 master it's at the slight rumble stage at present i have a garage by me that will try to change the bearing they have a press that goes to 20 tonne but the have sait these are a pig to get out sometimes and sugested i find another hub...
  6. Brakes/Hubs
    Hey guys, First time posting on here, but have had loads of great help already from the site. Basically, I'm trying to change the front wheel bearings on my Master. I've got everything unscrewed I just can't fathom how to remove the actual hub. The suspension spring is pressing down on the...
  7. Brakes/Hubs
    Hi I'm new to the website and hopefully have some help. My rear brakes on the offside of my Twingo have jammed on whilst reversing and I'm guessing the rear shoes have binded inside the drum. I need to know the hub size but and what I need to do to unjam the brakes as I think it's going to be...
  8. Brakes/Hubs
    I have researched this but cannot find an answer so I hope that somebody here may be able to offer some advice. I have a 2002 Kangoo without ABS and I need to change the rear wheel bearing, so I ordered one and set about removing the hub only to discover that the bearing listed is 55mm in...
  9. Brakes/Hubs
    After reconsidering helicoil repair of stripped wheel bolt hole. Does anyone have any experience of pulling and replacing the front hub drive flange. I`ve already got the brake caliper and wheel disc off. Is it now simply a case of undoing the 30mm drive shaft nut and attaching a hub puller to...
  10. Brakes/Hubs
    One of the wheel bolt hole threads on my hub have completely stripped. I`ve order M12 x 1.5 tap to try and recut new threads. Also ordered :frown2:a DIY heli-coil kit. Does anyone have any experience of this type of thread repair because I don`t fancy the alternative (ie. replacing the whole...
  11. Brakes/Hubs
    Hi all, I'm after shearing off two front wheel bolts on my 2000 kangoo. (My own fault for overtightening with a massive tire iron) I've had no luck trying to drill out the bolts, so my current plan is to wait for it to stop raining, take off the brake rotor and try to get a vise grips on the...
  12. Giveaways
    Would anyone like LAGUNA 2 rear hub nuts (77 03 034 275) in unopened packs , free to collector from NORTHAMTON .
  13. Brakes/Hubs
    im having a bit of difficulty in getting the rear offside wheel hub off my clio dci 03. basically I can't undo the four nuts at the back. They are a weird star shaped nut which at first I thought a 10 mill socket would fit but didn't, so im wondering if i need a specific type of socket or spanner.
  14. Brakes/Hubs
    Hi guys im in the process of fixing an ABS light fault on my clio. I think a bit of rust got onto the sensor. Thought it would be a simple job of taking the wheel hub off so I can get to the cable which is attached to the bearing. Now my only problem is that this things stuck on quite hard. Im...
  15. Steering and Suspension
    Hi, is anyone able to advise on the compatibility of front hubs from a 1.6 and 1.8 Scenic please? Hoping the driveshaft splines are the same.
  16. Brakes/Hubs
    Hopefully somebody knows the answer on this when servicing or changing the brake shoes on a Kangoo van (mine is 2004 model but I think it applies to some Clios) You need to remove the hub nut. I have been led to believe that you can only use them once. If so and I can see the logic in this would...
  17. Brakes/Hubs
    Hi, I have been browsing the forums for a few weeks now and it has provided me so far with some useful info. I am changing the driveshafts on my 1.2 Clio 51 plate, and the splines are locked solid in the hub on the passenger side. I even snapped a hub puller it is so tight. Any ideas would be...
  18. Brakes/Hubs
    Can anyone tell me the torque setting for my master rear hub nut, got to c hange the bearing. It's a 2002 (52) plate ex minibus. Thanks
1-18 of 112 Results
Top