Independent Renault Forums banner

Search results

1-20 of 97 Results
Advanced Search
  1. Front Caliper issues??? - HELP Please **Fixed**

    Ask the Experts
    Hey guys for anyone interest in the outcome. It was the abs pump. I replaced it and all was resolved and worming again. Thanks again to all who provide advice and ideas. Sent from my SM-G900F using Tapatalk
  2. Front Caliper issues??? - HELP Please **Fixed**

    Ask the Experts
    Hey DD. well I have undone the joint - pumped brake pedal - and no fluid coming out. Do I need to completely remove the hard brake pipe out or is undoing it completely like I've done sufficient enough? Sent from my SM-G900F using Tapatalk
  3. Front Caliper issues??? - HELP Please **Fixed**

    Ask the Experts
    OK. So so let's do both scenarios what do they mean? What would be the fix 1) open the joint, press the brake pedal and fluid comes out = ??? 2) open the joint, press the brake pedal and fluid does NOT comes out = ??? Sent from my SM-G900F using Tapatalk
  4. Front Caliper issues??? - HELP Please **Fixed**

    Ask the Experts
    The next joint is the abs module. So assuming that it would be a problem with ABS? Sent from my SM-G900F using Tapatalk
  5. Front Caliper issues??? - HELP Please **Fixed**

    Ask the Experts
    Yes brake is hard. As if to say new brake pads are in stalled and reservoir is pretty much on max mark Sent from my SM-G900F using Tapatalk
  6. Front Caliper issues??? - HELP Please **Fixed**

    Ask the Experts
    Sorry guys pic two must if forgot again. Lol Sent from my SM-G900F using Tapatalk
  7. Front Caliper issues??? - HELP Please **Fixed**

    Ask the Experts
    Lol I won't. Also I checked the bleed nipple on the caliper. Fully remove it. It looks brand new but i cleared it out to be sure but no difference. So don't think it's bleeder Sent from my SM-G900F using Tapatalk
  8. Front Caliper issues??? - HELP Please **Fixed**

    Ask the Experts
    Forgot pictures. Pic 1) is where I cracked it. Pic 2) is the brake line disconnected and currently that way barely loosing fluid a drip here and there. Should I put the old possible bad caliper on the good side and connect and see fluid passes through it clear and easily. That should at...
  9. Front Caliper issues??? - HELP Please **Fixed**

    Ask the Experts
    Hey. So the first picture is what I cracked quite loose not all the way out but fluid did dribble out. But not sure should u get loads out. The 2nd pic is how it is currently and it dribble every now and again. Let's just say I'm not filling up master cylinder Sent from my SM-G900F using Tapatalk
  10. Front Caliper issues??? - HELP Please **Fixed**

    Ask the Experts
    Hey D.D. Currently out with the car and carrying out some tests wondering what u think. 1) I cracked the bleeder and pressed on brake and no fluid comes out of the bleeder. But on other side fluid come out of bleeder as u would expect (shiny drivers side). 1.1) I tried your method of...
  11. Front Caliper issues??? - HELP Please **Fixed**

    Ask the Experts
    Thanks. I will try this but just to throw one more at you. You said it is impossible for both pistons to.move together, but isn't that how braking works. So say I change new discs and pads, when the job is done ur meant to pump the brakes a few times to ensure the caliper is on the pads. If it...
  12. Front Caliper issues??? - HELP Please **Fixed**

    Ask the Experts
    Thanks. I'll check this but I removed the back pad on the rusty / seized side and when I pressed brake the caliper piston was not coming out. Surely that has to point to seized caliper? ABS pump. The pads were in a state but in feel as tho it's caused of other reason aka heat which in turn...
  13. Front Caliper issues??? - HELP Please **Fixed**

    Ask the Experts
    Thanks for info. Not to sure if it is something more serious. I checked the sliders pins and they were moving pretty well. The side where the piston did not come out the discs was more rusty compared to the other shiny side. The brake pedal is hard to press as if I have new brake pads but pads...
  14. Front Caliper issues??? - HELP Please **Fixed**

    Ask the Experts
    Hey guys. I had by car jacked up in the air with both calipers showing the pistons. When I pressed brakes only the passengers side piston would come out. When I original took calipers off the both retracted fine it's just that it won't come out?? The passenger side brake disc looks worse...
  15. Renault megane mk3 coupe - Oil sump key?

    Ask the Experts
    Thanks Val It's appreciated mate [emoji3][emoji3][emoji3][emoji3] Sent from my SM-G900F using Tapatalk
  16. Renault megane mk3 coupe - Oil sump key?

    Ask the Experts
    Hey guys. I have a Renault Megane 2009 mk3 coupe 1.5 diesel. I am planning on doing an oil change on it. But need some information 1) Oil sump key: Does anyone know what size key need to drain the oil or can I just use the box end of an extension? 2) Engine oil: Does anyone know if this car...
  17. PSA start Vauxhall restructuring

    General Chat
    Amazing to think these measures are being carried out. How can you have something so right and then make it so wrong. I mean it's second/ third most popular car. Some bad decisions have been made behind closed doors. Sent from my SM-G900F using Tapatalk
  18. Wheel bolts torque spec?

    Wheels & tyres
    Definitely each to their own with this point. Not something I would anti seize wise as I have been told putting that on could cause you to over tighten the them with a torque wrench. Sent from my SM-G900F using Tapatalk
  19. Wheel bolts torque spec?

    Wheels & tyres
    Yeah that will be fine 8f your just checking over Sent from my SM-G900F using Tapatalk
  20. Wheel bolts torque spec?

    Wheels & tyres
    Loosening the bolts don't require no measurement of torque as your taking off. Just be sure when loosening to cracking the bolts with wheel on floor, cz if u don't when u try to undo them with wheel in the air it will just spin. When tightening again with car in the air u just want to get the...
1-20 of 97 Results
Top