Independent Renault Forums banner

bolt

  1. Renault 1.9dci crank bolt torque settings

    Engines
    Hi Does anybody now the torque settings for the 1.9dci crank main and big end bolts please. Cheers
  2. 8200668704 upper inlet manifold bolt needed

    Engines
    hi i wonder if anyone in here sells or can spare one bolt for upper inlet manifold part number 8200668704 . for clio 2000, 1.4 16v . mine comes and E12 head but and head will do the job thanks
  3. Rear suspension bolt

    Steering and Suspension
    Rear-right spring 2 years ago... And up until very recently... I've watched the YouTube videos how to do this. Only 2 bolts to undo, easy job right? Boom... What do people think is the best course of action? Given how tight it was, I highly doubt a bolt extractor will get it out. Drilling...
  4. Laguna 2 rear axle bush bolt- how do I shift this??

    Steering and Suspension
    Following all your super directions but can't shift the 12-sided bush bolt. , 17mm 6-sided socket rattles, 16mm 6-sided too small, 17mm 12-sided socket loose, 17mm ring spanner too big. Help!
  5. 2004 Grand Scenic - broke steering lock bolt

    Steering and Suspension
    So, what now? I managed to get the column out and need to transfer the steering lock to the new column, I have a replacement bolt (came with column). Would a screw extractor work? The steering still turn if I apply slight pressure to the lock. Would I be best cutting the Ali around it...
  6. Locking wheelnut bolt.

    Giveaways
    Hi folks. I have a locking wheelnut bolt that belonged to my Laguna 2. Sold her for scrap as she was t-boned a couple of weeks ago. It's from a 2003 estate. pictures on my facebook timeline ( https://www.facebook.com/photo.php?fbid=10218886426456920&set=pcb.10218886428056960&type=3&theater )...
  7. Lower arm ball joint fitting nut and bolt

    Steering and Suspension
    https://www.buycarparts.co.uk/blue-print/2885438 Son had MOT on his 60 plate Kia rio 2 petrol yesterday and had advisory on N/S ball joint..part is as link..been searching for 2x nuts and bolts for securing on the lower arm and finding nothing can anyone help with a possible supplier for...
  8. Please help me identify a bolt

    Steering and Suspension
    Please can someone with the software or knowledge help me identify the bolt (and nut) in this picture. Having a saga with a dodgy garage, I'm going to have to cut the remains out myself and fit a new one. The pic is of the Offside, but I need the Nearside if there is a difference. If I can get...
  9. Clio 2002 cylinder head bolt removal

    Engines
    Hi guys and girls, Any one know how to remove cylinder head bolts? I suspect some Muppet in the past who owned the car before me, as had the engine to bits and over tighten the bolts. I have up to now tried the proper way of remove them ( one turn at a time in a spiral) but the heads just...
  10. Laguna 2 1.6 K4M Cambelt Change **Sorted**

    Engines
    I'm biting the bullet and changing the timing belt/water pump so we don't get stuck in France profonde this autumn- can some kind person help me out with the pulley bolt size so I can order a proper socket and not have to use mine which seem to be made out of biscuits these days? I hear 18mm...
  11. Remove center bolt AC clutch Trafic??

    Heating & cooling
    I need to replace the AC clutch on a Trafic 2012 but it is very hard to remove the centrum bolt! I have managed to get it out half way using a impact wrench but now its stuck pretty good and the insex head is rounded. I can get a grip with pliers but it sure is stuck. Like it was seized on the...
  12. 2hrs to undo 1 bolt.... Rear calipers

    Brakes/Hubs
    So today with it being dry I tackled the rounded bolt in the caliper carrier, using heat and bloody big hammer and years of skill aquired in trade - I got the bugger out, with no damage to anything.... it took easily 2 to 2 1/2 hours just to shift the rounded E16 bolt. and 1/2 hour per other 3...
  13. length of seat bolt

    Campervan Chat
    I am installing a double seat in my master instead of the single one and I need to get one extra bolt. Anybody know what length these are?
  14. Part query - torx bolt

    Bodywork
    Hello, I am hoping this is first of all in the right place, and secondly someone can please help me with a part query. The door check strap on my 2011 grand scenic is clicking and I have bought a replacement one. I tried yesterday to undo the torx bolt that holds the arm of the check strap to...
  15. Pinch bolt on Scenic II strut

    Steering and Suspension
    At the last MOT the examiner commented on a noise from the o/s front strut when the steering was moved from side to side. As it was going to be dry this weekend I thought it would be a good idea to replace the strut top mount and bearing. And a fairly simple job became a major timewaster when...
  16. Wheel locking bolt key

    Wheels & tyres
    Hey guys hoping someone can shed some light on this for me. So I have lost or more it didn't come with the car my wheel lock key. I've seen on ebay a key that appears it would fit but after talking too Renault all these keys are.made individually. I've contacted a couple garages about getting...
  17. Upper inlet manifold bolt tightness? (Megane III Petrol)

    Engines
    How tight should the upper inlet manifold bolts be? Is there a recommended torque? Thank you. Megane III Petrol 1.6 Hatch 2009.
  18. Intake Manifold - Bolt torque specs

    Engines
    Hey guys I have a Renualt megane 5 door mk2 2006 1.6 16v petrol. I need to take off my inlet manifold as there is mess all in between the channels. Does anyone know the: 1) Tightening sequence of the bolts. 2) What the torque specs are (Nm) for the bolts. Sent from my SM-G900F using Tapatalk
  19. Renault megane - Thermostat bolt torque settings

    Engines
    Hey guys Have a 5dr Renualt megane mk2 2006 1.6 16v petrol. I am looking to change the thermostat does anyone know the torque settings for the bolts in NM please. Thanks. Sent from my SM-G900F using Tapatalk
  20. Megane Mk2 - Wheel Bolt torque specs

    Wheels & tyres
    Hey guys. I have a 2006 megane mk2 1.6. Does anyone know the torque specs in newton meters for my wheel bolts please? Thank you
Top