Independent Renault Forums banner

crankshaft

  1. Crankshaft sensor

    Engines
    Hi all , I have a 2004 automatic scenic and am having trouble getting to the crankshaft sensor, I have taken out battery and tray, removed the hoses, and have managed to remove the two retaining bolts, but I can't seem to get my hands in there to remove the connector as the gear selector seems...
  2. J8S 742 2.1 TD crankshaft seal

    Engines
    Does anyone know whether it is possible to replace the rear crankshaft seal on a J8S 742 2.1 TD without removing the engine? I***8217;m planning on taking the head off to replace piston rings. I have a bad oil leak from the rear by the bell housing and wonder if the leak could be caused by PCV...
  3. 06 Renault Clio mk 3 crankshaft sensor

    Engines
    Hello I am having trouble locating the sensor on my clio and was wondering if anyone had any idea where it is located.
  4. Location crankshaft sensor Renault Scenic II 2.0 v16 (2004)

    Engines
    I'm trying to locate the crankshaft sensor on my Renault Scenic II 2.0 v16 (2004). Does anyone know where to find it. I'm unable to find anything that looks like the replacement parts that sites show me should fit my Scenic. The engine bay Location several have said it would be but isn't...
  5. Megane 2005 Crankshaft and Connecting Rod Damage

    Engines
    This forum is about a 2005 Megane 2 1.5 TDCI. I have encountered this problem for yet the third time and would like an answer to why it is happening. I am a mechanic and the third client has come in with this problem. The crankshaft shields and connecting rod are worn out, always happening on...
  6. Laguna 2 1.6 K4M Cambelt Change **Sorted**

    Engines
    I'm biting the bullet and changing the timing belt/water pump so we don't get stuck in France profonde this autumn- can some kind person help me out with the pulley bolt size so I can order a proper socket and not have to use mine which seem to be made out of biscuits these days? I hear 18mm...
  7. Renault clio mk3 crankshaft sensor location

    Electronics
    Hello ,please help me , I have a problem with my Renault Clio Dinamique mk3 2007 , 1.6 petrol engine , I have to change the crankshaft sensor and I can't find it where is on the engine . Please help me . Thank you
  8. crankshaft sensor

    Electronics
    can someone tell me where the crankshaft sensor is located on a 56 plate clio diesel pictures if possible would be a great help i have the sensor its just got 1 bolt holding it in
  9. Camshaft and crankshaft sensors location

    Engines
    Could anyone please tell me where to find both these sensors in my 2005 grand scenic 2.0 petrol? Pictures would be even better! I've searched similar threads but pics I've found seems to be on other motors and I have come to believe that they might not be exactly the same. Thanks!
  10. crankshaft timing

    Engines
    HI. Last week i fitted a new timing belt on my 2007 clio 1,2 petrol. I did not tighten bottom pulley bolt properly so now crankshaft timing is out. Timing belt marks line up ok but crankshaft timing is out. I cannot workout how to set up valve timing to correct position of flywheel. Help very...
  11. Renault Grand Scenic - crankshaft sensor

    Engines
    Hi. I posted previously about a stalling problem which managed to sort out by cleaning the throttle housing. I also tried to replace the crankshaft sensor but the one I bought turned out not to fit as it had some brass spacers on it. Tried cutting them off as had car in bits and needed to get it...
  12. Scenic 1 2.0 16v F4R Engine non start after crankshaft pulley failure

    Engines
    Hi guys, as the title says, drive pulley failed the other evening (probably at 10mph), pulley replaced, water pump was leaking a bit so replaced, drive belt replaced. I was worried about timing as the breakdown guy accidentally turned key to start when moving the car of the flat bed and it...
  13. Espace 4 CrankShaft Pulley

    Ask the Experts
    Hi, Had to replace the crankshaft pulley on 2005 1.9 Espace last week as original was visibly damaged the damper material was coming out from between inner and outer sections . Got the pulley off , after a struggle (was very tight) and managed to get replacement from breakers . Replaced and...
  14. crankshaft sensor, not immobiliser

    Electronics
    My Laguna 1 Estate 16v has had an annoying intermittent fault, whereby it would turn over but not start. Confusingly it never did this when the engine was cold. I assumed this was a problem with the immobiliser transducer, but as it always started eventually I chose not to go to the expense of...
  15. Laguna crankshaft sensor

    Engines
    Hi all, I have a 2008 Renault Laguna that i need to replace the crankshaft sensor on, i have bought the sensor but for the life of me cant find the wee bugger under the bonnet, any help or pictures of position would be fantastic. Thanks in advance
  16. Renault Trafic Crankshaft sensor? camshaft sensor?

    Engines
    OK, so my Trafic (2004 Diesel) has failed to start on a couple of occasions recently - AA came out when it last did it (and the bloody thing started on first keyturn for him) however he ran the codes, and it showed what he described as the 'crankshaft sensor' showing as faulty. So, having...
  17. Crankshaft sensor?

    Engines
    Hi everyone, Currently own a 1.2 16v clio 2003 which I've owned for just over a year and a half. In the last Few weeks I've had a strange problem like my car looses power. It's only done it twice First time being 3weeks ago when I was on a slip road coming on to the motorway being in 2nd...
  18. Crankshaft sensor??

    Engines
    Hi everyone, Own a clio 1.2 16v 2003 Had the car for just over year and half however in the last 3weeks my car suddenly looses power almost feels like she stools but the engine doesn't turn off. It's only happened twice, first time being 3 weeks ago and again yesterday. When it happened first...
  19. R21 2.1TD 1992 crankshaft bolt torque setting?

    Engines
    As the title suggests....thanks in advance. RRRR
  20. Clio 2008 1.2 Petrol crankshaft pulley bolt

    Engines
    Hi All, Can anyone tell me what the size of the CRANK SHAFT pulley bolt is for this car. As I can't seem to find the socket to fit. (Assuming it is a mm size) Any help would be very much appreciated! JE/RB
Top