My 2013 Megane 3 stopped working a few days ago, big red STOP light on the dash and warning coming up that steering may lock. Having tested a few things (keycard, etc) garage has come back to me and said its the ESL module that's had it and its a dealer only part. He's contacted Reno...
Could anyone tell me the exact location of the ESP module on espace. Module has a part number
I tried searching for it via dialogys and all i got is how it looks. Not location. Tried searching the forum, no luck.
Asking for 3.0v6dci auto 2008.
Hi there. I***8217;m having a problem with my hazard lights being constantly on after my battery died and had been re-charged. Going through various forums it looks like disconnecting the alarm siren module can fix the problem.
Can you please help me to locate it?
I have a 2008 Renaul Megan...
I have a 2015 1.6 traffic and the factory fitted reverse sensors are quite often in fault. Typically as soon as you start the engine you get a constant beep and a message to check parking sensors.
The issue appeared about a year ago while it was under warranty and was fixed under...
Hi im looking for some advice on changing my ABS module, it has been sent away for refurb.
Can anyone advise on bleeding procedure and is it required to bleed the clutch?
Is there any special details i need to know as pump will be dry?
Any help will be much appreciated
I have a 55 plate 1.2 16 valve Clio.
My auto electrician tell me that the Uch is no good.
Now it's under the glove box.
Is there an easy way of getting this out??
The symptoms are that when I connect or disconnect the battery there is a spark.
When he removed the Uch fuse he said...
Hi Everyone, I am new to here.
I own a Renault Laguna 1.5dci Sport Tourer 2008 and all of a sudden there is a Brake Warning Alert on dash display accompanied by ABS light on. I`ve been to Renault garage and upon checking they stated it is probably the ABS Pump module and quoted more than €1000...
I own a Renault Scenic and the cables for the electronic handbrake seized up.
The module is working and I can replace the two cables which go to the callipers, but the cable which is "attached" to the module itself and runs to the bracket also needs to be replaced. The problem is that...
Just need a bit of advice on something a bit weird. Well its a Renault and its electronics so I guess not that weird!
A few years back 2 windows stopped working altogether and I got a fella to fix them adding his own home made modules (one touch system doesn't work but you could...
Getting a code come up on my mk2 clio 1.5 dci P0670 and I have been searching online and can't find anything that relates. I don't have any warning lights or any issues starting recently. I did have an egr code but again no warning lights but I sorted that after giving it a clean as it was stuck...
Chatting with the local diagnostics guru yesterday and the subject of a Trafic SRS mudule came up. He pointed to one in the yard and said he had just fitted a new one. Renault wanted 400 odd, Opel 150 odd for the same part give or take the label.
Can someone please tell me where the BPI module is located in my 09 grand scienic.
I have had water in the passenger footwell and my electrics have gone wild, I have cleaned out the ports behind the windscreen wipers but am told water ingress into the BPI module in the likely coarse of my...
As above people , my sons `06 Clio Campus Sport has the airbag / service light displayed on the dash.
A bit of history - original seats were looking really tired so we replaced them with a full set from the breakers , the original seats had no side airbags but the newer ones did so the wiring...
My Grand Scenic II 1.9dci with aut. climate control is having a party on my behafe - which i do not like.
The fan is working on and off, with no obvious pattern.
I have tried to take out the control module - did look nice, no burning at all. Afterwards the fan worked for a...
Hello to all,
we are replacing the steering lock module on a Megane 2 , 1.5 dci.
When we took off the plastic covers to reveal the module , the torx bolt on the module is hand-loose. We know its a left-hand thread, but it will not either tighten or come loose.
Any fail-safe method for...