I was browsing around and looking for more in-depth OBD2 apps and I stumbled across an app I've seen before but forgot about. 'Carly for Renault'
The lite version seems to do simple stuff such as error code reads/clears etc but I've seen mixed info about the paid version. It's...
Looking to get a OBD-II Engine System Diagnostic Tool for using on my Primastar. Could anyone suggest a reasonably priced one to get that is know to work on the Primastar. Bought an Ancel AD510 but advised by manufacturer it is not suitable, so have returned it.
Would an OBDII Code Reader work with my Primastar so in future I can look at codes. I know on another thread "that I can't find" mentioned maybe some other not the OBDII ? Blinking annoying as I had one but can't find it!
Edit found thread saying "Tech2 or Delphi" is that different to OB11...
I recently purchased an ELM327 for my Renault Megane Scenic from '99. When I plugged it in, it would power up, but the protocol couldn't be detected. I then read online that the ELM327 v2.1 is garbage, so I purchased an OM123, which works by cable, not bluetooth. Same problem, it...
Car is a 2012 Scenic III 1.5 dCi.
Yesterday on the motorway the car flashed up three messages (this may not be exact wording): Engine failure, Check Injectors, Check ESP. Car Lost power and was nursed off the motorway at the next exit. Stopped for and hour, car then restarted and ran...
Long story (see my previous thread) where 2011 Espace FAP/DPF sensor was expensively replaced by main dealer because of a DF1196 fault code. Shortly afterwards, the same problem (dashboard message "Check Injection" and limp mode) arose again. Different dealer than updated software...
Sorry if i've posted this in the wrong place, I'm new to forums, it's a bit of a minefield.
Anyway, I bought one of those Bluetooth ELM327 OBDII diagnostic adapters and downloaded various diagnostic apps, Torque being one of them.
It works on my MG and my Brothers car but for some...
I have a 2000 1.4 Clio 8v sport my son has a 2005 Clio extreme 1.2 16v (Can't really think of 2 cars that are neither sporty nor extreme but that's another story!)
I'm looking to dip my toe into reading (or is it scanning) and, if ever required, resetting OBD or OBD2 OBDII codes and other...
Found these on ebay yesterday.
They are a generic OBDII Port overlay re-mapping device.
The guy has hundreds of them, and he flashes them with the correct Software for your model / engine.
He said he had a performance map for the L7X V6, thus...
this is my first post to the forum.
My car is Megane II saloon (LM1S).
The service warning is "on", and the engine label is missing.
I 'm very confused if the "infinite" (maybe fake) clones of ELM327 are i) working and ii) give real and correct values as the expensive readers.
So I have done lots of searching around and I was hoping this forum could assist me. I have asked locally but no one seems to be able to provide me with an accurate answer.
I own a 2009 Renault Megane R26 - with vehicle is fitted with a Sagem 3000 ecu.
I am looking for a wireless...
Where is the ODBII location on a phase lag II please?
On phase 1, you used to be able to remove the ashtray and it was under there. Phase II you can't remove the ashtray.
Anyone help, currently sitting in the car with me laptop looking for the port :-) Its freezing out here :-)
Donut reversed over the old one. It's kucking fackered!
Cant find anywhere that does a universal USB to OBDII cable
Let alone one that DEFINITELY works with Renault Explorer.
Any links would be most helpful guys!
I ahve a 2002 Meagne 1.9DTi,
I just plugged in my sealy code reader which keeps bringing up the message "Linking error", the ignition is on, cable is firmly connected and machine is powered up..
Can anyone cast any light on this situation?
I've just seen some OBD2 software that runs on an android phone and uses a bluetooth OBD2 adaptor. Such adaptors are sold cheaply (under £20) on ebay.
Does anyone know if these adaptors work with a 2002 Vel Satis 3.0 dCi?
Not sure if this is the right location to ask this, but I'm trying to find the OBDII port on a Megane 2010 and it is not under the start/stop button as in earlier models as there is a port there for Audio.
Anyone have any ideas?