setting

Hi, Just about to replace the rear discs on a 2009 2.0 Turbo Laguna III Coupe (petrol) Have already read about and had one panic attack, with reference to electronic parking brake restrictions when compressing calipers. But have just had the wheel off, and the motor is on the rear cross member...

Someone posted how to reset the ecu to factory settings using the stick control and key card but can't find it

This is a strange one, I have a Renault Grand Modus Eco2 Dynamique 1.5dCi 2011 and struggling to understand the Cruise Control, I can switch the Cruise Control on and it displays on the instrument panel ----- but I can't work out how to set the speed, I looked in the manual and it shows control...

Settings 1, 2 and 3 work. Setting 4 doesn't, most of the time. The heat temperature setting or engine operating temperature doesn't seem to make a difference whether or not blower setting 4 decides to work. Cabin filter, and the area in which the filter is housed, is clean. Any idea? Thank...

I wasn't sure wether my timing belt was done so I have decided to strip the engine down and put on a new belt and water pump. Good job really because the water pump was leaking slightly and belt was starting to crack. I want to complete my task but having a problem guessing where the 2 lugs on...

Hi, was wondering if anyone can help me! I have a clio 2001, and today I discovered my front wipers do not work when i pull to clean the windscreen or on the slow wiper setting - they will come on if I use the faster settings! - Anyone know why this might be and how to fix it? Worried that they...

Hi - hoping you can help or point me in the right direction. The heater blower on my girlfriends Clio has suddenly stopped working, it was working fine last week but now changing the setting 1-4 has no effect at all. I don't have any experience with Renaults and finding it difficult to track...

As the title suggests....thanks in advance. RRRR

Renault Scenic II 1.6 16v VVT Dynamique 2008 I have over the last couple of months had an intermittent NSR door open warning flashing up on the dash with an accompanying beep it would not happen often and would usually stop if i locked the doors with the dash switch however it has now started...

Took the battery out and replaced it with a new one put the radio code in that was fine. But when setting the clock the hour keeps changing by itself every second an doesn't stay on a series number just works itself through all the numbers an keeps going. Anyone had this problem before?

Hey lads me again I wanted to ask about the news and traffic setting on the radio I have tryed it and it does not seem to be working wondering what could be wrong

Hello everyone , my name is Cristiano and i living in Rome , I hope you can help me with my Scenic , a couple of days ago I connected the Can Clip to store the keys that no longer worked , up here all right , then I had the bad idea to set a reserve fuel value , now with full, just use 5 liters...

Hello, I have a 2007 scenic with keyless entry and starting ie. Get in the car and press start. I need to replace plastic slider thingys that run in the channels on the sunroof so I would like to be able to use the sunroof without having to keep starting the engine. How do I get the electrics...

Hi all, Just purchased a camshaft setting plate for diesel. It appears that the arm is permitted to slide along a slot with respect to the fixing plate. Please can somebody confirm that this is intended to swing like that. many thanks cheers regrds .

Hi As per the title, please advise torque setting for Clio 1 1.9d 2000 crankshaft pulley bolt, or is it just as tight as poss?? Cheers R

Can I change the brightness settings of the reverse camera?? I have grand scenic 3 phase 1 carminat navigation. In some manuals for the navigation there is "reverse camera settings" but in my model I don`t have it.(I guess its for newer models). :frown2:

I've read the manual and it said to set the time by using the buttons on the dashboard below the clock and using clock option in the settings - however this setting isn't there. Also, I haven't got an SD card for my Sat Nav, so it permanently reads 'no maps found!' with the clock in the...

I have an unhealthy scrapeing noise on application of the brakes on Renault Kangoo 2009 (1.2 petrol). Am ready to take the drums off to have a look at the problem but can't find details on the torque setting for when I tighten up the main nut which secures the brake drum.

I have found how to do it through the head unit, but is there any other way to set the time if, for example I had an aftermarket head unit in there? That's if the time still displays on the top dash display, and also doesn't automatically display the time as set on the aftermarket head unit.

I have a 2005 Renault Scenic 1.5 diesel. It is regularly serviced but I have an on-going problem. The car starts first time, every time. The issue I have is that upon initial acceleration the car judders/loses power intermittently but it lasts for just a minute or two. After that I have no...