Independent Renault Forums banner

torque

  1. 1.5 DCI - Pressure Plate nut Torque Settings?

    Engines
    Hi each and all, does anyone know the correct Torque settings for the pressure plate to flywheel bolts on a 2006 1.5 DCI K9K Engine? kind regards in advance.
  2. Torque wrench setting

    Engines
    Evening all, does anyone know how to put this info to a bolt? Bolt is the crankshaft pulley bolt on a 1.5DCI engine (Bolt is M12) M12 Bolt: 60nm + 100+/-10 degrees on the instructions the plus is above the minus between the 100 and the 10 Many thanks if you know, it means I have a shorter...
  3. 2008 Renault Kangoo - Torque Wrench Settings.

    Steering and Suspension
    Hello there. I spent all day today trying to find manual or torque wrench settings for two bolts securing shock absorber in my 2008 Renault Kangoo 1.5. I even had a chat with Renault staff members, but they said they cannot provide me with this information and redirected me to a website for...
  4. megane 2 rear hub nut torque

    Brakes/Hubs
    hi all, i am going to replace the rear discs/pads on the wifes 2005 megane 1.4 16valve but i seem to be getting different hub nut torque settings from different sources. i searched the forums on here and people keep saying 280 nm,which seems a little tight. then other people say 175 nm but i...
  5. ELM327, Torque and Megane Scenic 02

    Tools & equipment
    Hey. Inspector found some old lambda error code in my car. I tried using ELM327 and Torque for android. Got all the live data and everything seemed to work. But when I looked for an error codes, it did not find any. I was wondering if anyone had any experience with the software and the tool. I...
  6. Megane 2 torque up front wishbones

    Steering and Suspension
    Hi guys Just replaced front wishbones and dropped the front subframe. The wishbones are in and ready to be torqued up. Usually i do this with the car on its wheels and the hayne says to do so. However to do this the front half of the subframe has to be off to access the front wishbone bolt...
  7. Lost Haynes please help with torque

    Interiors
    Hello all new here, Ihave removed my seats to get them covered but now i need to put them back. Can someone please tell me the torque(nm) settings to a) bolt seats back to floor b) attach seat belt to seat bolt Thank you
  8. torque setting

    Engines
    hi, does anybody know what torque settings the head bolts on a 2004 renault megane 1.5 dci should be?
  9. Torque wrench setting for a centre hub on Grand Scenic.

    Brakes/Hubs
    I am replacing the rear discs on a Grand Scenic 2 does anyone know the torque setting for the Center hub.
  10. lidl torque wrench set

    General Chat
    popped down lidl just to see what was on offer and picked up a torque wrench set comes with 3 sockets 17/19/21mm and 120mm extension bar 28-210nm 1/2in drive for £16 handy to keep in the boot not just for the wheel nuts but general repairs as well Ron
  11. Scenic 2 1.9tdi 6 speed torque help

    Transmissions
    Hi does anyone know the torque settings for the 6 bolts from clutch to flywheel?
  12. Torque setting espace front strut top nut

    Steering and Suspension
    Hi I own a renault espace 3 2.2dci,I am having to replace the front suspension top bearings,does anyone out there know the torque wrench setting for the big top nut on the front shock absorber?Many thanks in advance
  13. Lucas Caliper Torque Settings

    Brakes/Hubs
    I have a 2002 Espace III with Lucas brakes. I need to replace the rear calipers discs and pads as well as some other jobs ready for MOT. I have been searching for the torque wrench settings for the back brakes but the only reference I can find to them is this quote on another thread "there are...
  14. Help..... I am in need of the head bolt sequence and torque settings

    Engines
    For our 04 scenic 1.5dci. I Am going to tackle a head gasket change and need the above before I go any further. Thanks guys
  15. wheelnut torque's

    Wheels & tyres
    Does anybody know the torque setting for wheelnuts on a 2004 espace 3.0dci ????
  16. Tightening torque procedure 2.2 dci injector bolts

    Engines
    Hi Guys, I am new to this forum and maybe the info I seek is already out there: if so I apologise for time wasting; but I've tried hard and just can't find it. I am in the process of changing a faulty injector on my 2001 Renault (Grand) Espace 2.2 DCi (common rail diesel). I can't for the life...
  17. Renault Kangoo Crank and Rod caps Bolt Torque Specs

    Engines
    Hello Everyone, A week ago I decided to overhaul my Renault Kangoo 1.4l, 8 Valve, Engine no. K7J, due to loud knocking noise. I am not a mechanic, I have never opened an engine before. But thanks to the Internet I learned the basic engine overhaul procedure. Anyway, I haven't got a manual...
  18. Laguna 2 rear bush bolt torque required

    Wheels & tyres
    I need to tighten the bolt that goes through the rear bush. It takes a 16mm ring spanner. I am not sure what this bolt is actually called (is it axle bolt, anti-roll bar clamp bolt?), so cannot identify the torque required from this link: http://www.renaultforums.co.uk/showthread.php?t=118539...
  19. MeganeII 2003 2.0 petrol - Code DS109 Engine torque multiplex CHECK GEARBOX

    Transmissions
    Hi all, this is a desperate attempt from the other side of the world (NZ!) to find out whats wrong with my Megane. I keep having intermitent sharp hard gear shifts between 2nd and 3rd and first the computer flags it as injector fault then after a few seconds changes to ESP/ASR fault followed...
  20. DF4 722 (1.2 16v) - head bolt torque + angle

    Engines
    Anyone know the correct head bolt torque + angle for the above engine ? (I know what they are for the DF4 712 but wonder if the DF4 722 might be different)
Top