Independent Renault Forums banner

ABS light on after rear discs replaced

5K views 5 replies 4 participants last post by  chris m 
#1 ·
hi ppl,

i have just replaced my rear discs on my new shape megane 2003 1.5dci

since they were changed my ABS warning light has come on my dash board and will not go off.

i have been told their is a sensor on the bearings and they have to be put back the same way they came out, after reversing the bearings again the fault light remains on,

does the ABS light have to be reset after discs have been changed??

any help would be great.

cheers

Paul.
 
#2 ·
There should be a castellated ring on the back of the bearings or the discs.

Have you got a picture of the back of the old discs handy?.It might be that wrong discs have been used,or that the ring has to swapped over between the old and new discs.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top