Independent Renault Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter · #1 ·
Hi guys,
I have a abs problem.first the abs,serv and esp light came on and was told the pump may have gone.crap eh.then replaced the pump and it didnt put the lights off.so i have been told the pump needs to be reset with the ecu.is that correct?
 

·
Technical Supremo, Platinum Member
Fiat Panda Multijet 1300 Diesel
Joined
·
5,413 Posts
Have you replaced any of the drive shafts and did the brake problems start after you did? if so check the reluctor rings for any cracks being loose or not having the same number of teeth, as for having the ecu reset I don't know sorry but when the abs light came on on my car it was the reluctor ring on one side covered in grease from a loose cv joint gaiter, cleaning it put the light out within about 6 ft.
 

·
Technical Supremo, Platinum Member
Fiat Panda Multijet 1300 Diesel
Joined
·
5,413 Posts
Obviously a system I have not come across then.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top