[shaunyboy1]

Hi and hello . could some one please tell what the torque settings are for the drive shafts on a 51 plate kangoo 1.9 65d the big nut on the ends. i have just changed both sides due to joint failure i have searched the net for settings and have found out i cant even buy a haynes manual for this as they dont make one. thankyou!

 

[thomas3]

The drive shaft nut should be torqued to 202 ft - lb or 28kgm if you are metric.
I use a peter russek manual for my kangoo it covers most things needed.
Thomas3