Need DDT4ALL values for 8.7 inch rlink2 system (anyone with 8.7 inch rlink2 screen + DDT4ALL can help)

Kolesguy321 · Apr 10, 2021

Hello, so upgrading my 7 inch to 8.7 inch on my Koleos, but I need to know certain DDT4ALL values to do this.

If someone could connect their rlink2 8.7 inch (doesn't have to be a Koleos) screen to DDT4ALL and take a screenshot or just give the values of

AUDIO -->RADNAV --> ENGINEERING CONFIGURATION --> Central panel-display parameters (at the bottom).

Next and finally, I need

HVAC --> ClimBoxGen2_v29 (or whatever you have thats similar) --> CLIMBOX+ --> Global-configuration --> CL_WithControlPanel.

Appreciate anyone who helps me out, thanks.

mneale1 · Apr 10, 2021

Hi,
I have just swapped my screen over, I used these settings but also had to used the developer mode to get the screen image to rotate.
The Climbox setting use the CP7
Mark.

Kolesguy321 · Apr 10, 2021

mneale1 said:
Hi,
I have just swapped my screen over, I used these settings but also had to used the developer mode to get the screen image to rotate.
The Climbox setting use the CP7
Mark. View attachment 190266

Thanks Mark!

In terms of the screen rotation, can't you just change it via DDT4ALL as well?

Finally, you didn't have to touch DISPLAYMODE High Mid and picked HIGH in the developer mode at all, right?

EDIT: forgot to ask, it should be the same for all rlink2 cars, but what car did you do it on?

mneale1 · Apr 10, 2021

Hi,
Yes it's just the misc/binary1_4 button, then reset unit by holding the power button for a few seconds.
Mark

Kolesguy321 · Apr 10, 2021

Alright, thanks for all the help mark.

I saw some guy have Pixel clock Edge select present, no idea why but seems everyone else has it on "not present".

mneale1 · Apr 10, 2021

No problem. I tried it present and not present when I was having my issues but it didn't change anything.
Mark

Need DDT4ALL values for 8.7 inch rlink2 system (anyone with 8.7 inch rlink2 screen + DDT4ALL can help)

Top Contributors this Month

Recommended Communities