Independent Renault Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter #1
my auxilliary belt broke on above vehicle and has damaged the oil seal behind the crankshaft pulley. I actually have the said oil seal ready to go on. Is this job straight forward or do i need to book it in at my local garage? cheers
 

·
Premium Member
Joined
·
40,429 Posts
The job is straight foward as long as you can get the pulley bolt undone.Ideally you will need an airgun/compressor to remove it as it will be bl00dy tight.Once the pulley is off it's just a case of hooking the old oil seal out and tapping in the new one making sure it goes in nice and square,then refit the pulley.You will then need to thread lock and torque up the pulley bolt.
 
1 - 2 of 2 Posts
Top