[scenicspares]

Left my scenic (1.9td) v reg sat for a month. Went back to it but wont start, turns over niceley but wont fire.

I notice the glow plug light on the dashboard is not lighting up at all.

Any obvious suggestions please?

 

[mickeybo]

May be able to shed some light on this but would require engine code should be on a small alloy plate
near oil filter Regards Mickeybo

 

[scenicspares]

unable to see a plate? engine number is: C105619 F9Q Engine ?

Any idea if there is a seperate fuse for the glow plug relay?

 

[scenicspares]

2 days on and still struggling on this. unable to get it started.

Can any one point me in the right direction please?

 

[mickeybo]

On your f9q engine code glow plug control module has 8 terminals marked 1-2-3 1a-2a 1c-2c-b1
Terminal 1a ignition on 12v's via fuse 6 7.5 amp
Terminal 2 permanent 12v's ign on or off via fuse 4
40 amp. Terminals 1 feeds glow plugs 1 & 2
Terminal 3 feeds glow plugs 3 & 4
Terminals 1c & 2c are spliced together and go to ecu
pin no 30 Terminal b1 goes to ecu pin no 50
terminal 2a is the earth. At ignition on check at ecu
pin 30 glow plugs on for 12v's. Ecu pin no 50 ign on
0v ign glow plugs off 10.5 v's Hth Regards Mickeybo