Hi I've got a 2013 captur with a 0.9 tce that's got a rough idle and sometimes cuts out ive took the vvt solenoid out and cleaned it then cleared any fault code took it a road test all was good let it sit for a couple of hours then i drove the car after about 5 mins the eml light came back on and the dash said check anti pollution so i ran a diag on it and these were the fault codes that came up 001178 which is inlet shifter camshaft phaser position error and 010664 which is inlet pressure consistency valve outside tolerances any help would be appreciated thanks in advance
![Image]()
Owen2342
0.9 tce rough idle
Hi I've got a 2013 captur with a 0.9 tce that's got a rough idle and sometimes cuts out ive took the vvt solenoid out and cleaned it then cleared any fault code took it a road test all was good let it sit for a couple of hours then i drove the car after about 5 mins the eml light came back on and the dash said check anti pollution so i ran a diag on it and these were the fault codes that came up 001178 which is inlet shifter camshaft phaser position error and 010664 which is inlet pressure consistency valve outside tolerances any help would be appreciated thanks in advance
![Image]()
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
