[grillphil]

Thanks TazzyK. I'll do all the checks and see what, if anything happens and report back.

Cheers.

 

[grillphil]

Ok. Here are the results to my test. I've not checked the UCH yet but will do at the weekend and post my findings on the other thread.

Warnings on dash - None
Auto Lights Activated - No warnings and if I place a card over the sensor, the lights do come on.

Engine on, flick Int Wipe to pos'n 2 then back to 1 - Spray droplets of water onto the screen over sensor - Nothing happens.

Engine on, select reverse rear wiper does not activate.

I have a couple of pics here of the sensor/gel pad. they look a bit iffy to me. Any thoughts?

Remember, I still have to inspect the UCH at the weekend so we'll see if that has anything to do with it.

[/IMG]

[/IMG]

 

[grillphil]

I'll get hold of a couple of Gel Pads and fit them once they arrive. We'll see what happens then.

Cheers.

 

[grillphil]

New Gel Pad fitted and after spraying a little water onto the screen, the intermittent wipe activated. Now, all I need is it to rain and I'll check it again on the road to see if everything works as it should. No doubt, it'll rain very soon!

Phew, one electrical problem solved i hope.

Thanks guys for the advice.

What next???????