Independent Renault Forums banner

Seat belt pre-tensioner problems

22K views 5 replies 3 participants last post by  madnoel10  
#1 ·
Had the service and airbag light coming on and off and had sorted it by looking under the passenger seat to find the previous owner had cut the connectors off and bodge soldered the wires together. After stripping the wires, twisting and heat shrink tubing the problem was solved... now both seat belt pre-tensioners are coming up as a fault. Last resort, took the screws out of the plastic trim from around the pre-tensioner and removed steel clip and popped the lead out and shoved dielectric silicone grease into the male and female connectors and put it all back together. So far this appears to have solved the problem, time will tell.

Image


http://www.buyspares.co.uk/product....e=google&utm_medium=base&utm_campaign=products&gclid=CI-9wMi_n70CFU_KtAodEGUAcg

Now can any one help me with my glow plug light which is on, fault comes up as glow plugs need changing, its not, as I have now changed them and its still on. Not all the time, when I put my foot down it goes off then back on. No smoke or poor acceleration. Have also just changed EGR
 

Attachments