04 Scenic 11 Heater Resistor.
HI ALL,
Just had the dubious pleasure of having a Scenic 2
heater resistor to replace. If you carefully prize away the
bezel on the instrument panel and remove 2 torx screws
holding the instuments in place.Behind this through a gap
in the dash ..look to the left and you will see the resistor unit fixed to the air box with one torx screw, there is a
multiplug with several wires fixed to this, it is possible to remove plug socket and the resistor although a bit fiddly.
The main blower motor feed and earth wires also go from resistor to blower motor on left hand side , behind lower dash glovebox so removal of lefthand lower dash may be necessary.
In the case i,m working on the multiplug has melted and a terminal burnt away . A new resistor is needed and also a small section of wiring loom with plug, this is a modified
section of wiring supplied by Renault so they are aware
of problems in this area.
Hope that this may help others to fix Scenic 2 blower faults.
PLEASE REMEMBER TO DISCONNECT BATTERY BEFORE DOING
ANY ELECTRICAL REPAIRS AND FIRST NOTE RADIO CODE.